Skip to content

Cart

Your cart is empty

SET
SET

Snow Queen – Crystal【セット】

Sale price¥1,540Tax included.

在庫○
Quantity

Snow Queen – Crystal

ITORICOTオリジナルヤーンで楽しむ、「グラニースクエアシュシュ」が編める特別なセットです。

雪の女王をイメージした、透き通る氷のようなペールブルーと白を重ねた、静けさのあるカラーセット。光を受けてきらめく雪や氷の結晶を思わせる、透明感のある色合いです。凍てつく空気の中にある美しさを、そのまま閉じ込めたような雰囲気を楽しめます。


●使用糸について

編み図の指定糸とは異なるため、部分ごとに使用する糸が異なります。本数取りは以下をご参照ください。

・本体:bon bon merino 1本/FLUORITE 1本(合計2本取り)
フリル:bon bon merino 2本取り


・bon bon merino - ホワイト 10g

お菓子のようにカラフルで楽しい色合いが魅力のメリノウール。
スポンディッシュな肌触りときれいな発色が特徴です。

混率:メリノウール100%
番手(太さ):2/20(極細)
糸長:10g = 約100m


・FLUORITE - ペールブルー  10g

ふわふわなキッドモヘアを存分に楽しめる極細糸です。
軽く空気を含んだような柔らかな風合いに仕上がります。

混率:キッドモヘア35% / 防縮ウール35% / ナイロン30%
番手(太さ):1/13(超極細)
糸長:10g = 約130m


パターンについて

グラニースクエアシュシュ

かぎ針編みの基本的な編み方(鎖編み・長編み・引き抜き編み・円編み)だけで完成します。
髪につけても、手首にブレスレット感覚で身につけてもかわいいデザインです。

使用針:かぎ針 6/0号

※1セットでシュシュが2つ編めます!(ヘアゴム: 太さ3mm、直径5cmの場合

※掲載写真はサンプルです。写真のアイテムは本パターンを使用していますが、使用している糸はセット内容とは異なります。


●サンプル

使用針:かぎ針 6/0号

使用糸(セット内商品使用):

・本体:bon bon merino 1本/FLUORITE 1本(合計2本取り)
フリル:bon bon merino 2本取り


⚠ ご購入前にご確認ください

  • こちらはダウンロードパターンです。

  • 編み図に誤表記が見つかった場合は、こちらで随時訂正内容をご案内しております。



Snow Queen – Crystal【セット】
Snow Queen – Crystal【セット】 Sale price¥1,540Tax included.

Recommended needle size from the number

Be sure to knit a swatch and adjust it, as it will vary depending on the tightness of your own hands and the length of the material's fur.
Thickness Name Number Length (m) Needle size mm Crochet hook size
Super Thick Less than 1/1 Under 100 Size 7 and up 0 or more 10/0 or higher
Extra Thick 1/1-1/2 100–200 Size 10 to 15 5.1 - 6.6 8/0 - 10/0
Average 1/2 to 1/3 200–300 Size 7 to 10 4.2 - 5.1 5/0 - 7/0
Gota 1/2.5 to 1/4 250-400 Size 4 to 7 3.3 - 4.2 4/0 - 5/0
Medium Fine 1/3.5 to 1/5 350–500 No. 2 to No. 4 2.7 - 3.3 2/0 - 4/0
Combined 1/4.8 to 1/8 480–800 No. 1 to No. 3 2.4 - 3.0 1/0 - 3/0
Ultra-fine 1/8 - 1/12 800~1200 Size 0 to 2 2.1 - 2.7 Lace needles ~2/0
Ultra-fine 1/13 or more Under 1300 No. 0 2.1 or less Lace Needles

The key to knitting with industrial yarns!

The second stitch is sweeter! ...Knit loose and fluffy!

Industrial yarns are waxed to make them easier to knit with machines, and they are designed to be washed at the end of the process, so they may have oil or solvents on them.
By washing at the appropriate temperature, dirt is removed and the fibers become fluffy, so the key is to knit a bit loosely (softly).

Be sure to knit a swatch for testing!

Since wool and similar fibers tend to shrink, it's important to knit a swatch and calculate the shrinkage rate.
For items with longer fibers, gently pressing them while washing will enhance the texture.

How to wash industrial yarns at home

1

Iron

First, the finishing iron and steam are applied to the stitch.

2

Pre-washing

Soak in hot water (no detergent) for about 15 minutes at 40°C or less

3

Washing

(detergent wash, neutral detergent Emaar, etc.) Wash as desired, or if you want to fluff out the yarn, wash it with a leftover cloth or other material and rub it to make it fluffier.

4

Rinsing

Change the hot water and rinse until the water is clean.

5

Finishing touches

Use fabric softener if desired. Use of fabric softener will further improve the texture.

6

Dehydration

If using a washing machine, place in a net for 30 seconds to 1 minute. Light towel drying is also acceptable.

7

Dryness

We recommend drying flat in the shade.

8

Steam iron

Organize shapes and stitch nicely.